What to buy with Torbot Adhesive Remover
- Hollister M9 Odor Cleaner and Decrystallizer
- Safe n Simple Ostomy Appliance Deodorant
- Coloplast Brava Non Sterile Ostomy Protective Powder
How to use TR420 Adhesive Remover?
- Removing Appliances
- Saturate a ball of cotton or use an eyedropper and apply a few drops of solvent at the top of disc between it and skin. Gently pulling the disc away from the body as the solvent penetrates down between the disc and skin. Apply more as needed until removal is achieved
- Thinning Cement
- If Torbot Bonding Cement should become too thick, it can be thinned by adding up to 2oz. of Torbot Solvent per 4oz. can of cement. Add 1/2 ounce at a time and allow to sit for at least 8 hours. Mix well
- Cleaning Cement From Skin
- Saturate a cotton ball or gauze with Torbot Solvent. Rub over cement until cement begins to loosen. Rub with a clean dry cloth. Follow same procedure for removing accumulated cement or solvent based adhesives from pouches or discs
Cautions
- Fire and Explosion Hazards
- Material is highly volatile and readily gives off vapors which may travel along the ground or be moved by ventilation and ignited by pilot lights, other flames, sparks, heaters, smoking, electric motors, static discharge, or other ignition sources at locations distant from material handling point. Never use welding or cutting torch on or near drum (even empty) because product (even just residue) can ignite explosively
- Extinguish Media
- Foam
- Carbon Dioxide
- Dry Chemical
- Firefighting Instructions
- Water may be ineffective. Water may be used to keepfire-exposedcontainers cool until fire is out
- Wear a self-contained breathing apparatus with a full face piece operated in the positive pressure demand mode with appropriated turn-out gear and chemical resistant personal protective equipment
First Aid Procedures to take while using TR420 Solvent Adhesive Remover
- Inhalation Exposure
- Breathing small amounts of this material during normal handling is not likely to cause harmful effects
- If irritation occurs remove to fresh air
- If experiencing breathing difficulty, seek medical attention
- Eye Contact
- May cause mild eye irritation
- Remove contact lenses
- Rinse eyes with water
- If necessary seek medical attention
- Skin Contact
- May cause mild skin irritation
- Prolonged or repeated contact may dry the skin
- Wash exposed area with mild soap and water
- If irritation occurs, seek medical attention
- Handling and Storage Procedures
- Store in a cool, dry area in ambient temperature
- Keep tightly closed containers away from heat, direct sunlight or other sources of ignition
