Features
- Silent Call Signature Series Wireless Doorbell Transmitter is ideal for homes without doorbells, or for side doors or back doors where doorbells have not been installed
- Battery operated and not intended for wiring to existing doorbell circuitry
- Combines the doorbell button and transmitter in one compact, easy-to-install unit
- Range upto 2000 feet
- Low battery indicator
- Includes:
– Wireless Doorbell 418 MHz Transmitter
– One 12 volt battery
– Mounts easily with two small screws
– Product manual
More Information
- Installation:
– Remove your Silent Call wireless doorbell transmitter from its packaging
– Place the doorbell transmitter firmly against the wood frame on the outside door trim, approximately 48 inches up from the doorsill. Note that if the doorbell transmitter is mounted to a metal surface, the range will be greatly reduced
– Using a pencil, mark each screw hole on the mounting surface. Remove the doorbell transmitter from the wood trim
– Using a small nail or other sharp pointed object, make a starter hole for transmitter case screws (included)
– Screw transmitter to door trim making sure printing on the case is right side up
– To test operation of transmitter, press doorbell button. This will cause your Silent Call Signature Series receiver to operate - Changing Battery:
– Remove doorbell transmitter from doorframe and slide battery cover off, exposing battery
– Remove battery and install new 23AE, 12 volt alkaline battery
– Make sure polarity (+ and -) is correct when installing new battery - Operation:
– Whenever the doorbell transmitter button is pressed, a coded wireless signal is sent to any Silent Call Signature Series receiver, causing it to activate
– Transmission range is determined by which Signature Series receiver you are using
