Feature of Relief Pak HotSpot Moist Heat Pack Cover
- Relief Pak Hot Spot Hot Pack All Terry Cover is filled with foam or additional terry
- Conform more easily to each treatment area
- Hook and loop fasteners on covers keep heat packs in place
What to Buy With Polar Roller Ice Stainless Steel Ball
- Polar Roller Ice Stainless Steel Ball
- Use with Moist Heat Pack Cover:
– Two basic cover designs.
– The pocketed cover is designed for simplicity, the flat cover is designed for versatility. - WARNING:
– If the cover is too hot, use additional toweling.
– Pocketed cover (oversize, standard and neck size packs)
– Place cover on a flat surface with the pocket facing up and the flap open.
– Remove pack from the heating unit with tongs by gently lifting loop tab.
– Place pack into cover, tuck flap into pocket, or close with hook and loop tabs
Note: Neck covers do not have flaps.
Flat cover (oversize, standard and half size packs)
– Place cover on a flat surface with the hook and loop fastener facing up.
– Remove pack from the heating unit with tongs by gently lifting loop tab.
– Place pack on the left side of the cover.
– Fold cover over the pack. Make sure the hook/loop fasteners are aligned.
– Press hook/loop fastener together to secure the pack.
Note: Oversize pack can be covered by 1 oversize cover or 2 standard covers (1st cover hook/loop up, pack in middle, 2nd cover hook/loop down). - Care for moist heat pack cover:
– Covers can be laundered in washing machine and dryer.
– Wash separately, no bleach.
Max drying temperature: 160°F / 71°C.
– Fasten hook and loop closures together before laundering to avoid hook snagging terry material
– Avoid Ironing.
