Features
- Humane Restraint Ambulatory Wrist-Waist Restraint Belt is 48″L x 1-1 W with 10 size adjustments
- Cuffs size: 12″L x 2-1W with 7 size adjustments
- Two, 12″ straps that secure the wrist cuffs to the belt
- Polyurethane enhances patient comfort and staffs ease of use, it is durable and will not stretch or shrink
- Leather Restraints is a combination of a Humane Restraint belt and a pair of wrist cuffs
- Polyurethane restraint is a combination of a Humane Restraint belt and a pair of wrist cuffs
- Also Available
- Medline Cinch-Type Patient Safety Limb Holders
More Information
- MNDL-401-
– Material Used: Steel loops, Humane Restraint L-300 locks, 12/13 oz leather, light orthopedic leather lining and rivets
– Cleaning and Maintaining: For regular cleaning, wipe with a mild soap and warm water. When decontaminating bloodborne pathogens, use one cup of bleach to a gallon of water, then rinse. After wiping the leather, allow it to air dry and apply neats-foot oil
– Storage: Store in a dry area to prevent mildew - MNDL-401-POLY-
–Material Used: Steel loops, Humane Restraint L-300 locks, polyurethane, and rivets
–Cleaning and Maintaining: For regular cleaning, wipe with a mild soap and warm water. When decontaminating bloodborne pathogens, use one cup of bleach to a gallon of water, then rinse and dry
–Storage: Store away from heat greater than 280°F or open flame - Instructions:
– Unlock all locks. Wrap belt around waist so that the lock is in back and on the right side of the body
– Loop the end of the belt through the lock and follow L-300 locking procedures on back of this page to secure
– Adjust the leather side straps to the desired length of movement and use the same locking procedures to secure the straps
– Then take one wrist and put it into the open wrist cuff, wrap the cuff around the wrist, and fit to the appropriate size adjustment
– Follow L-300 locking procedures on back of this page to secure the lock.
– Use this same procedure to secure the other wrist - L-300 Lock Instructions:
– To open lock: Insert key, turn until lock pops up. Slide out strap. If pressure is on the locking pin, pull strap to release tension
– To close lock: Slide strap through and to adjustment; push down until it clicks.
NOTE: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation
