Benefits of EZ-ACCESS SUITCASE Ramp
- Singlefold Ramp Hinge:
– The singlefold hinge runs the full length of the ramp and ensures the ramp is strong and safe
– It also helps protect against pinching and ensures the ramp is easy to set up - Slip-resistant Tread:
– Allows mobility devices to retain traction in all weather conditions - Ergonomic Handles:
– Ergonomically-designed handles make SUITCASE Signatures Series Ramp easy to carry anywhere
– Handles for the ramp feature a durable design, so user does not has to worry about them breaking as he/she carries the ramp - Self-adjusting Bottom Transition Plate:
– Easily convert a mobility device from the SUITCASE Ramp to any terrain with the self-adjusting bottom transition plate that will make for a smooth change to any surface - Weight capacity: 800lb
- Click Here for Instruction Manual
What to buy with Folding Signature Ramp?
- EZ-ACCESS TRANSITIONS Modular Entry Mat Riser
- Roll-A-Ramp Seg Mount Brackets
- EZ-ACCESS Ramp Hanger
How to use EZ-ACCESS Ramps?
- Installation Instructions:
1. Ramp is shipped fully assembled.
2. Place ramp on landing in the folded position, making sure that the top lip transition plate (labeled TOP) is resting securely on the landing.
3. Unfold ramp and center on landing.
4. Ensure top lip transition plate is secure before using ramp. It is recommended to attach ramp temporarily to the landing using provided clevis pins (drill 1/4″ hole in landing) or semi-permanently using screws through pre-drilled holes at the top of each section.
5. To prevent ramp from becoming dislodged during use, make sure that the top lip transition plate overlaps the resting surface as far as possible. The surface holding the top lip transition plate needs to be substantial and of sound construction. - Important Information:
– Rated load is 800 pounds.
– Never exceed rated load.
– Read and follow all labels, instructions, safety and maintenance information before use.
– Do not use if ramp is damaged or unstable.
– For wheelchairs and scooters only (not intended for commercial use).
– Ramp may be slippery when wet or icy.
– Use only if sufficient maneuvering room is available at both ends of the ramp to assure safe travel when entering and exiting the ramp.
– Use ramp only with a qualified helper and always use your lap belt. - Safety and Maintenance:
– Regularly check ramp for damage, and check and tighten any loose fasteners.
– Keep ramp surface clear of ice, snow, dirt, leaves, and other debris.
– For snow/ice, remove accumulation and sweep the surface clean.
– To remove dirt, leaves, and other debris, sweeping the surface or using a garden hose will usually suffice, but, if needed, use a damp cloth or soft brush with non-alkaloid detergent and water.
– Rinse well and use extra caution if ramp surface is wet.
Manuals
- SUITCASE Singlefold Ramp Technical Specifications
- SUITCASE Brochure
