Drive Expedition Aluminum Transport Chair Features
- Drive Lightweight Expedition Aluminum Transport Chair has companion activated wheel locks
- Users with limited upper body strength or limited dexterity will love the ease of operation and handling
- 12″ rear flat-free wheels provide a more stable ride over various terrains, plus ease of going over thresholds and curbs
- Black composite wheels require virtually no maintenance and incorporate non-marring surface
- Comes assembled, just pop open, flip up back and put on footrest
- Notes:
- Footrests included with transport chair
- Chair fabric is nylon
What to buy with Drive Lightweight Transport Chair?
- Drive Medical Replacement Carry Bag
- CareActive Wheelchair Rain Poncho
- Sammons Preston Wheelchair Footrest Extender
- Skil-Care Gel Form X-Cushion
How to Operate Drive Transport Chair?
- To Open the chair, tilt to one side and push down on seat rails.
- Lift back support to upright position. The lock to secure the back will engage automatically. To fold down and store, pull up on locks simultaneously, and carefully fold down the back support.
- To attach footrests, align the holes on the footrest arm with the pegs on the frame of the Transport chair.
- To Adjust the length of the footrests, loosen the bolt (or knob) on the telescoping tube shaft. Tighten securely after adjustment. The lowest part of the footrest should not be less than 2 1/2 inches from the ground to permit proper clearance.
- To remove the Swing-away footrest, release the lock. Swing outward and rearward. Simply lift up and off to remove the footrest.
- The safety belt is already attached for use and should not be removed from the Transport Chair
Maintenance Tips For Drive Expedition Transport Chair
- Proper care and maintenance are important in order to keep your Transport Chair in good working condition.
- Be sure that your chair is in proper working condition at all times.
- At least once a week, wipe off chrome using a clean soft cloth. If the chair is exposed to moisture, dry the chair immediately.
- The metal parts of the chair should be polished once a month with an auto wax.
- Clean the upholstery with a mild soap solution, rinse and wipe dry. Worn or torn upholstery should be replaced promptly as it may not support your body weight.
- Inspect the wheels at least once a month. Correct any side play by loosening the lock nut on the axle, then tighten the axle just enough to remove side play.
- Solid rubber tires require limited upkeep but need to be cleaned periodically with a damp cloth.
- Solid rubber tires need to be replaced if they become cracked or severely worn
Safety Tips for Using Drive Expedition Chair
- Before entering or leaving the chair, engage the dual wheel locks against the tires on both rear wheels. Make sure the front casters are in the forward position before transferring into or out of the chair.
- Always fasten the safety belt when the transport chair is in motion.
- Do not move forward on the seat while leaning forward out of the chair. If it is absolutely necessary to do so, make sure the front casters are in the forward position.
- If you are picking an object up from the floor, go past the object, and then go backwards. The casters will then swing to the forward position.
- Leaning out of the transport chair without proper assistance could cause tipping.
- Do not step on the foot plates when transferring, as this could cause tipping.
Drive Transport Wheelchair User Manual
Drive Transport Chair Parts Diagram
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
